AOBEN 600W Electric Jig Saw Guide 6 Variable Speed Electric Saw 10 Pieces Metal Blades 1 Pieces Carbon Brush Jigsaw Power Tools

AT3602 Product Specification

Rated Voltage/Frenquency:

220V~50Hz

Rated Power:

600W

No-Load Speed:

500-2800r/min

Cutting Ability:

Wood 65mm;Steel 10mm

Cutting Angle:

-45° ~ +45°

Weight:

3.0kg

1.6-Speed Regulating Guide Wheel

2.Lock Button

3.Powerful Motor

4.Knife Lifting Adjust Knob

5.Baseplate

6.Saw Blade Assembly Switch

7.Throttle Knob

8.Cutting Angle Adjusting Rod

9.Guide Rod Locking Knob

6 Speed Regulation

This part is a 6 - speed electronic regulating wheel. From the first gear to the sixth gear, the speed of the machine will be gradually accelerated. When you want to cut the plastic, you can use any of the first gear to the fourth gear. When you are cutting aluminum, you can use either gear 2 or gear 3. You can use either gear 3 or 4 when cutting stainless steel. Any gear between gear 3 and 6 can be used to cut steel plates. When cutting wood you can use either gear 5 or 6.

Lock Switch

The switch on the side of the handle is the lock switch of the machine. By pressing the lock switch, you can freed your hands in continuous work, and you don't have to hold the running switch all the time. After all, your hands will feel tired in the process of vibration if you use them for a long time.

Knife Lifting Adjusting Knob

The left side of the machine is equipped with a height adjusting switch for the cutting blade, which can adjust the saw blade quickly according to the requirements of your working cutting depth. In gear 0, you can cut wood and plywood in straight line. In gear 1, you can cut small curves on aluminium, hard wood and low carbon steel. Medium curve cutting can be carried out in gear 2. When the switch points to 3 gears, it can cut wood with large curve quickly.

Chip Removal Tube

The bottom of the machine is equipped with a chip removal tube, which can quickly absorb the sawdust generated by cutting while working, and maintain a clean working environment. Of course, the use of this device needs to be connected with the vacuum device.

Fast Loading and Unloading Saw Blade Dial Button

There is a button at the front of the machine. You can move the button to load and unload the saw blade quickly.

Cutting Angle Adjusting Rod

Through the black pole at the tail of the machine, you can adjust the angle of the machine from 0 to 45 to change your cutting angle.

Guide Rod Locking Knob

The knob shown in the figure can help you fix the ruler accurately and quickly, and make your work more convenient.